Yamaha YZF-R125 Service Manual: Valves and valve springs

Yamaha YZF-R125 Service Manual / Engine / Valves and valve springs

Valves and valve springs


Installing the camshaft and rocker arms
1. Lubricate: Rocker arms Rocker arm shafts 2. Lubricate: Camshaft 3. Install: Camshaft "1" NOTE: Make sure that the camshaft projections "a" and hole "b" are positioned as s ...

Removing the valves
The following procedure applies to all of the valves and related components. NOTE: Before removing the internal parts of the cylinder head (e.g., valves, valve springs, valve seats), make sure th ...

Other materials:

Checking and lubricating the sidestand
Checking and lubricating the sidestand The operation of the sidestand should be checked before each ride, and the sidestand pivot and metal-to-metal contact surfaces should be lubricated if necessary. WARNING If the sidestand does not move up and down smoothly, have a Yamaha deal ...

Removing the starter clutch
1. Remove: Starter clutch bolts "1" NOTE: While holding the generator rotor "2" with the sheave holder "3", remove the starter clutch bolts. Do not allow the sheave holder to touch the projection on the generator rotor. ...

Checking the engine oil level
1. Stand the vehicle on a level surface. NOTE: Place the vehicle on a suitable stand. Make sure the vehicle is upright. 2. Start the engine, warm it up for several minutes, and then turn it off. 3. Check: Engine oil level The engine oil level should be between the minimum level ...

2024 Copyright www.yam-r125.net |