The engine operation is not normal and the engine trouble warning light comes on.
1. Check:
a. Check the fault code number displayed on the FI diagnostic tool.
b. Identify the faulty system with the fault code.
Refer to "Self-Diagnostic Function table".
c. Identify the probable cause of the malfunction.
Refer to "Diagnostic code table".
2. Check and repair the probable cause of the malfunction.
3. Perform fuel injection system reinstatement action.
Refer to "Reinstatement method" of table in "TROUBLESHOOTING DETAILS" on page 8-41.
4. Set the main switch to "OFF" and back to "ON", and then check that no fault code number is displayed.
NOTE:
If other fault codes are displayed, repeat steps (1) to (4) until no fault code number is displayed.
5. Erase the malfunction history in the diagnostic mode. Refer to "Sensor operation table (Diagnostic code No. 62)".
NOTE:
Setting the main switch to "OFF" will not erase the malfunction history.
The engine operation is not normal but the engine trouble warning light does not come on.
1. Check the operation of the following sensors and actuators in the diagnostic mode. Refer to "Sensor operation table" and "Actuator operation table".
If a malfunction is detected in the sensors or actuators, repair or replace all faulty parts.
If no malfunction is detected in the sensors and actuators, check and repair the inner parts of the engine.
Checking the rear shock absorber assembly
1. Check:
Rear shock absorber rod
Bends/damage Replace the rear
shock
absorber assembly.
Rear shock absorber
Oil leaks Replace the rear
shock absorber
assembly.
Spring
Damage/wear Replace the
rear shock absorber
assembly.
Bushing
Damage/wear Replace the rea ...
Tires
To maximize the performance, durability,
and safe operation of your motorcycle,
note the following points regarding
the specified tires.
Tire air pressure
The tire air pressure should be checked
and, if necessary, adjusted before each
ride.
WARNING
Operation of this vehicle with impro ...
Checking the rear wheel
1. Check:
Rear wheel axle
Rear wheel
Wheel bearings
Oil seals
Refer to "CHECKING THE FRONT WHEEL"
on page 4-8.
2. Check:
Tire
Rear wheel
Damage/wear → Replace.
Refer to "CHECKING THE TIRES" on page
3-23 and "CHECKING THE WHEELS" on
page 3-25.
3. Measure:
Radi ...