Yamaha YZF-R125 Service Manual: Troubleshooting
- General information
- Starting failures
- Incorrect engine idling speed
- Poor medium-and-high-speed performance
- Shift pedal does not move
- Jumps out of gear
- Faulty clutch
- Overheating
- Poor braking performance
- Faulty front fork legs
- Unstable handling
- Faulty lighting or signaling system
Checking the fid (fast idle solenoid)
1. Disconnect:
FID (fast idle solenoid) coupler
2. Check:
FID (fast idle solenoid) resistance
a. Disconnect the FID (fast idle solenoid) coupler
from the FID.
b. Connect the pocket t ...
General information
NOTE:
The following guide for troubleshooting does not
cover all the possible causes of trouble. It should
be helpful, however, as a guide to basic troubleshooting.
Refer to the relative procedu ...
Other materials:
Checking the rear wheel
1. Check:
Rear wheel axle
Rear wheel
Wheel bearings
Oil seals
Refer to "CHECKING THE FRONT WHEEL"
on page 4-8.
2. Check:
Tire
Rear wheel
Damage/wear → Replace.
Refer to "CHECKING THE TIRES" on page
3-23 and "CHECKING THE WHEELS" on
page 3-25.
3. Measure:
Radi ...
Checking the brake fluid level
1. Stand the vehicle on a level surface.
NOTE:
Place the vehicle on a suitable stand.
Make sure the vehicle is upright.
2. Check:
Brake fluid level
Below the minimum level mark "a" → Add the
recommended brake fluid to the proper level.
A. Front brake
B. Rear brake
WA ...
Rider seat
To remove the rider seat
Insert the key into the seat lock,
and then turn it clockwise.
Seat lock
Open.
Pull the rider seat off.
To install the rider seat
1. Insert the projection on the front of
the rider seat into the seat holder
as shown.
Projection
...