Yamaha YZF-R125 Service Manual: Troubleshooting
The ignition system fails to operate (no spark or intermittent spark).
NOTE:
- Before troubleshooting, remove the following part(s):
1. Seats
2. Fuel tank
3. Right side cover
4. Left side panel
5. Left upper side cowling
Circuit diagram
2. Crankshaft position sensor
4. Main fuse
5. Main switch
8. Sidestand switch
9. Battery
17.Engine stop switch
23.Lean angle sensor
25.ECU (engine control unit)
26.Ignition coil
27.Spark ...
Other materials:
Installing the rear shock absorber assembly
1. Install:
Rear shock absorber assembly
Relay arm "1"
NOTE:
Install the relay arm as shown in the illustration.
2. Tighten:
Rear shock absorber assembly upper nut
Relay arm nut
Rear shock absorber assembly lower nut
3. Install:
Connecting arms
NOTE:
When ins ...
Disassembling the front fork legs
The following procedure applies to both of the
front fork legs.
1. Remove:
Rubber cap
Clip "1"
Front fork cap "2"
(with O-ring)
Fork spring
NOTE:
Push the front fork cap in the direction of the arrow
shown in the illustration to remove the clip.
2. Drain:
Fork oil
NOTE ...
Checking the tires
The following procedure applies to both of the
tires.
1. Check:
Tire pressure
Out of specification Regulate.
WARNING
The tire pressure should only be checked
and regulated when the tire temperature
equals the ambient air temperature.
The tire pressure must be adjuste ...