Yamaha YZF-R125 Service Manual: Transmission
- Checking the shift forks
- Checking the shift drum assembly
- Checking the transmission
- Checking the clutch push rods
- Assembling the main axle and drive axle
- Installing the shift forks and shift drum assembly
Installing the crankshaft
1. Install:
Crankshaft "1"
NOTE:
Install the crankshaft with the crankshaft installer
pot "2", crankshaft installer bolt "3", adapter
(M12) "4" and spacer (crankshaft installer) "5".
...
Checking the shift forks
The following procedure applies to all of the shift
forks.
1. Check:
Shift fork cam follower "1"
Shift fork pawl "2"
Bends/damage/scoring/wear
Replace the
shift fork.
2. Check:
...
Other materials:
Cable routing
Front brake light switch lead
Right handlebar switch lead
Throttle cable
Main switch
Clutch cable
Clutch switch lead
Left handlebar switch lead
Sub-wire harness
Horn
Speed sensor lead
Front brake hose
Main switch lead
Left headlight assembly lead
Right headlight asse ...
Installing the engine
1. Install:
Engine "1"
Engine mounting bolt (rear lower side) "2"
Engine mounting nut (rear lower side) "3"
Engine mounting bolt (rear upper side) "4"
Engine mounting nut (rear upper side) "5"
Engine mounting bolt (front side) "6"
Engine mounting nut (front side) "7"
NOTE:
Do not ...
Catalytic converters
This vehicle is equipped with catalytic
converters in the exhaust system.
WARNING
The exhaust system is hot after operation.
To prevent a fire hazard or
burns:
Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
Park the vehic ...