Yamaha YZF-R125 Service Manual: Tightening torques

Electrical specifications
...

General tightening torque specifications
This chart specifies tightening torques for standard fasteners with a standard ISO thread pitch. Tightening torque specifications for special components or assemblies are provided for each chapt ...

Other materials:

Checking the spark plug cap
1. Check: Spark plug cap resistance Out of specification Replace. a. Remove the spark plug cap from the spark plug lead. b. Connect the pocket tester ( × 1k) to the spark plug cap as shown. c. Measure the spark plug cap resistance. ...

Installing the shift forks and shift drum assembly
1. Install: Shift fork-L "1" Shift fork-C "2" Shift fork-R "3" Shift drum assembly "4" Springs Shift fork guide bar "5" NOTE: The embossed marks on the shift forks should face towards the right side of the engine and be in the following sequence: "R", "C", "L". 2. Check: Tr ...

Adjusting the valve clearance
The following procedure applies to all of the valves. NOTE: Valve clearance adjustment should be made on a cold engine, at room temperature. When the valve clearance is to be measured or adjusted, the piston must be at top dead center (TDC) on the compression stroke. 1. Remove: ...

2024 Copyright www.yam-r125.net |