Yamaha YZF-R125 Service Manual: Throttle body

Checking the fuel pressure

1. Check: Pressure regulator operation a. Remove the fuel hose connector cover "1" and disconnect the fuel hose "2" from the fuel pump. CAUTION:Although the fuel has been removed from ...

Removing the throttle body

1. Extract the fuel in the fuel tank through the fuel tank filler hole with a pump. 2. Disconnect: Fuel hose WARNINGCover the fuel hose connections with a cloth when disconnecti ...

Other materials:

Checking the radiator fan motor
1. Check: Radiator fan motor Faulty/rough movement → Replace. a. Disconnect the radiator fan motor coupler from the wire harness. b. Connect the battery (DC 12 V) as shown. Positive tester probe → blue "1" Negative tester probe → black "2" c. Measure ...

Assembling the main axle and drive axle
1. Install: Toothed washer "1" Circlip "2" NOTE: Be sure to install the circlip so that its sharp edge "a" is facing away from the toothed washer and gear. Be sure the circlip ends "b" are positioned at the axle spline groove "c". 2. Install: 2nd pinion gear "1" NO ...

Installing the rear brake caliper
1. Install: Brake caliper "1" Copper washers Brake hose "2" Union bolt "3" WARNINGProper brake hose routing is essential to insure safe vehicle operation. Refer to "CABLE ROUTING" on page 2-33. CAUTION:When installing the brake hose onto the brake calip ...