Yamaha YZF-R125 Owners Manual: Tail/brake light

This model is equipped with an LEDtype tail/brake light.

If the tail/brake light does not come on, have a Yamaha dealer check it.

    Replacing a headlight bulb
    This model is equipped with quartz bulb headlights. If a headlight bulb burns out, have a Yamaha dealer replace it and, if necessary, adjust the headlight beam. ...

    Replacing a turn signal light bulb
    Remove the turn signal light lens by removing the screw. Screw Remove the burnt-out bulb by pushing it in and turning it counterclockwise. Insert a new bulb into the so ...

    Other materials:

    Lubrication diagrams
    Clutch push lever Main axle Drive axle Crankshaft Oil filter Oil pump assembly Oil strainer To cylinder head Camshaft Crankshaft Main axle Drive axle ...

    Assembling the main axle and drive axle
    1. Install: Toothed washer "1" Circlip "2" NOTE: Be sure to install the circlip so that its sharp edge "a" is facing away from the toothed washer and gear. Be sure the circlip ends "b" are positioned at the axle spline groove "c". 2. Install: 2nd pinion gear "1" NO ...

    Installing the front brake caliper
    1. Install: Brake caliper "1" (temporarily) Copper washers "2" Brake hose "3" Brake hose union bolt "4" WARNINGProper brake hose routing is essential to insure safe vehicle operation. Refer to "CABLE ROUTING" on page 2-33. CAUTION: Install the brake ...

    2024 Copyright www.yam-r125.net |