Yamaha YZF-R125 Service Manual: Specifications
General specifications
- Engine specifications
- Chassis specifications
- Electrical specifications
- Tightening torques
- Lubrication points and lubricant types
- Lubrication system chart and diagrams
- Cooling system diagrams
- Cable routing
Special tools
The following special tools are necessary for complete and accurate tune-up
and assembly. Use only
the appropriate special tools as this will help prevent damage caused by the use
of inappropriat ...
Other materials:
Checking the steering head
1. Wash:
Bearings
Bearing races
2. Check:
Bearings
Bearing races
Damage/pitting →Replace.
3. Replace:
Bearings
Bearing races
a. Remove the bearing races from the steering
head pipe with a long rod "1" and hammer.
b. Remove the bearing race from the lower
bracket ...
Installing the drive chain
1. Lubricate:
Drive chain
Master link
2. Install:
Drive sprocket
Drive sprocket retainer bolts
3. Install:
Master link
O-rings
Master link plate
Master link clip "1"
CAUTION:
The closed end of the master link clip must
face in the direction of drive ch ...
Checking the decompression system
1. Check:
Decompression system
a. Check the decompression system with the
camshaft sprocket and the decompression
cam installed to the camshaft.
b. Check that the decompression lever "1"
moves smoothly.
c. Without operating the decompression lever,
check that the decompression cam " ...