Yamaha YZF-R125 Owners Manual: Replacing an auxiliary light bulb
This model is equipped with two auxiliary lights. If an auxiliary light bulb burns out, replace it as follows.
- Remove the socket (together with the bulb) by pulling it out.
-
Auxiliary light bulb
- Remove the burnt out bulb by pulling it out.
- Insert a new bulb into the socket.
- Install the socket (together with the bulb) by pushing it in.
Replacing the license plate light bulb
Remove the socket (together with
the bulb) by pulling it out.
License plate light bulb
Remove the burnt-out bulb by pulling
it out.
Insert a new bulb into the socket.
...
Supporting the motorcycle
Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other maintenance
requiring the motorcycle to stand upright. ...
Other materials:
Troubleshooting details
This section describes the measures per fault code number displayed on the FI
diagnostic tool. Check
and service the items or components that are the probable cause of the
malfunction following the order
given.
After the check and service of the malfunctioning part have been completed,
re ...
Checking and lubricating the brake and shift pedals
Brake pedal
Brake pedal
Shift pedal
Shift pedal
The operation of the brake and shift
pedals should be checked before each
ride, and the pedal pivots should be lubricated
if necessary.
Recommended lubricant:Lithium-soap-based grease
...
Shifting
Shifting
Shift pedal
Neutral position
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the illustration.
TIP
To shift the transmission into the neutral
position, press the ...