Yamaha YZF-R125 Service Manual: Removing the swingarm
1. Stand the vehicle on a level surface.
| WARNING Securely support the vehicle so that there is no danger of it falling over. |
NOTE:
Place the vehicle on a suitable stand so that the rear wheel is elevated.
2. Measure:
- Swingarm side play
- Swingarm vertical movement
a. Measure the tightening torque of the pivot
shaft nut. 
b. Measure the swingarm side play "A" by moving the swingarm from side to side.
c. If the swingarm side play is out of specification,
check the spacers, bearings, and dust
covers. 
3. Remove:
- Pivot shaft nut
- Pivot shaft
- Swingarm "1"
- Swingarm adjusting collar "2"
a. Loosen the pivot shaft nut.
b. Fully turn in the swingarm adjusting collar so that it contacts the frame "3".
c. Remove the pivot shaft nut, washer, pivot shaft and swingarm.
Swingarm
...
Checking the swingarm
1. Check:
Swingarm
Bends/cracks/damage
Replace.
2. Check:
Pivot shaft
Roll the pivot shaft on a flat surface.
Bends Replace.
WARNINGDo not attempt to straighten ...
Other materials:
Engine oil and oil filter element
The engine oil level should be checked
before each ride. In addition, the oil
must be changed and the oil filter element
replaced at the intervals specified
in the periodic maintenance and lubrication
chart.
To check the engine oil level
Place the vehicle on a level surface
and hol ...
Preparation for removal and disassembly
1. Before removal and disassembly, remove all
dirt, mud, dust and foreign material.
2. Use only the proper tools and cleaning equipment.
Refer to "SPECIAL TOOLS" on page 1-8.
3. When disassembling, always keep mated
parts together. This includes gears, cylinders,
pistons and other part ...