1. Stand the vehicle on a level surface.
WARNING Securely support the vehicle so that there is no danger of it falling over. |
2. Remove:
NOTE:
Remove the lower ring nut with the steering nut wrench "2".
WARNING Securely support the lower bracket so that there is no danger of it falling. |
Types of bulbs
The bulbs used on this vehicle are shown in the
illustration.
Bulbs "a" and "b" are used for the headlights
and usually use a bulb holder that must be detached
before removing the bulb. The majority
of these types of bulbs can be removed from
their respective socket by turning them coun ...
Checking the cylinder head
1. Eliminate:
Combustion chamber carbon deposits
(with a rounded scraper)
NOTE:
Do not use a sharp instrument to avoid damaging
or scratching:
Spark plug bore threads
Valve seats
2. Check:
Cylinder head
Damage/scratches Replace.
Cylinder head water jacket
Min ...
Handlebar switches
Left
Left
1. Pass switch "PASS"
2. Dimmer switch "/"
3. Turn signal switch "/"
4. Horn switch""
Right
Right
Engine stop switch "/"
Start switch""
Pass switch "PASS"
Press this switch to flash the headlight.
Dimmer switch "/"
Set this switch to""
for the high
beam an ...