1. Straighten the lock washer tab.
2. Loosen:
NOTE:
While holding the clutch boss "2" with the universal clutch holder "3", loosen the clutch boss nut.
Shifting
Shifting
Shift pedal
Neutral position
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the illustration.
TIP
To shift the transmission into the neutral
position, press the ...
Starting circuit cut-off system operation
If the engine stop switch is set to "
" and the main switch is set to
"ON" (both switches are closed), the
starter motor can only operate if at least one of the following conditions is
met:
The transmission is in neutral (the neutral switch is closed).
The clutch lever is pulled to the ...
Installing the front brake master cylinder
1. Install:
Brake master cylinder "1"
Brake master cylinder holder "2"
NOTE:
Install the brake master cylinder holder with the
arrow mark "a" pointing forward.
Align the end of the brake master cylinder holder
with the punch mark "b" on the handlebar.
First, tighten the front bo ...