Adjusting the exhaust gas volume
NOTE:
Be sure to set the CO density level to standard,
and then adjust the exhaust gas volume.
1. Remove:
Rider seat
Refer to "GENERAL CHASSIS" on page 4-1.
2. Set the main switch to "OFF".
3. Disconnect:
Self-diagnosis signal connector "1"
4. Connect:
FI diagnostic tool "2 ...
Checking the clutch boss
1. Check:
Clutch boss splines
Damage/pitting/wear Replace the
clutch
boss.
NOTE:
Pitting on the clutch boss splines will cause erratic
clutch operation.
Checking the pressure plate
1. Check:
Pressure plate
Cracks/damage Replace.
Checking the clutch push lever and short clutch push ...
Checking the front brake disc
1. Remove:
Front wheel
Refer to "FRONT WHEEL" on page 4-6.
2. Check:
Brake disc
Damage/galling Replace.
3. Measure:
Brake disc deflection
Out of specification Correct the
brake disc
deflection or replace the brake disc.
a. Place the vehicle on a suitable stand ...