Yamaha YZF-R125 Service Manual: Rear shock absorber assembly

Installing the steering head

1. Lubricate: Upper bearing Lower bearing Bearing races 2. Install: Lower ring nut Rubber washer Upper ring nut Lock washer Refer to "CHECKING AND ADJUSTING THE STEERING HEAD ...

Removing the rear shock absorber assembly

1. Stand the vehicle on a level surface. WARNINGSecurely support the vehicle so that there is no danger of it falling over. NOTE: Place the vehicle on a suitable stand so that th ...

Other materials:

Checking the cooling system
1. Remove: Side covers Upper side cowlings Refer to "GENERAL CHASSIS" on page 4-1. 2. Check: Radiator "1" Radiator inlet hose "2" Radiator outlet hose "3" Coolant reservoir hose "4" Water pump breather hose "5" Cracks/damage → Replace. Refer to "RADIATOR" on page 6-1 ...

Fi system
The fuel pump delivers fuel to the fuel injector via the fuel filter. The pressure regulator maintains the fuel pressure that is applied to the fuel injector at only 250 kPa (2.50 kg/cm², 36.3 psi). Accordingly, when the energizing signal from the ECU energizes the fuel injector, the fuel ...

Installing the front brake caliper
1. Install: Brake caliper "1" (temporarily) Copper washers "2" Brake hose "3" Brake hose union bolt "4" WARNINGProper brake hose routing is essential to insure safe vehicle operation. Refer to "CABLE ROUTING" on page 2-33. CAUTION: Install the brake ...