Yamaha YZF-R125 Service Manual: Rear brake

Installing the front brake master cylinder

1. Install: Brake master cylinder "1" Brake master cylinder holder "2" NOTE: Install the brake master cylinder holder with the arrow mark "a" pointing forward. Align the end of the br ...

Introduction

WARNINGDisc brake components rarely require disassembly. Therefore, always follow these preventive measures: Never disassemble brake components unless absolutely necessa ...

Other materials:

Replacing a turn signal light bulb
Remove the turn signal light lens by removing the screw. Screw Remove the burnt-out bulb by pushing it in and turning it counterclockwise. Insert a new bulb into the socket, push it in, and then turn it clockwise until it stops. Install the lens by installing ...

Adjusting the clutch lever free play
Adjusting the clutch lever free play Clutch lever free play adjusting bolt Clutch lever free play The clutch lever free play should measure 10.0-15.0 mm (0.39-0.59 in) as shown. Periodically check the clutch lever free play and, if necessary, adjust it as follows. Slide the ...

Checking the front brake disc
1. Remove: Front wheel Refer to "FRONT WHEEL" on page 4-6. 2. Check: Brake disc Damage/galling Replace. 3. Measure: Brake disc deflection Out of specification Correct the brake disc deflection or replace the brake disc. a. Place the vehicle on a suitable stand ...