Checking the stator coil
1. Disconnect:
Stator coil coupler
(from the wire harness)
2. Check:
Stator coil resistance
Out of specification → Replace the
crankshaft
position sensor/stator assembly.
a. Connect the pocket tester ( ×
1) to the stator
coil coupler as shown.
b. Measure the sta ...
Assembling the front fork legs
The following procedure applies to both of the
front fork legs.
WARNING
Make sure the oil levels in both front fork
legs are equal.
Uneven oil levels can result in poor handling
and a loss of stability.
NOTE:
When assembling the front fork leg, be sure to
rep ...
Checking the condition of the bulbs
The following procedure applies to all of the
bulbs.
1. Remove:
Bulb
WARNINGSince the headlight bulbs get extremely
hot,
keep flammable products and your hands
away from them until they have cooled
down.
CAUTION:
Be sure to hold the socket firmly when re ...