Yamaha YZF-R125 Service Manual: Generator and starter clutch

Yamaha YZF-R125 Service Manual / Engine / Generator and starter clutch

Generator and starter clutch


Generator and starter clutch


Installing the piston and cylinder
1. Install: Top ring "1" 2nd ring "2" Oil ring expander "3" Lower oil ring rail "4" Upper oil ring rail "5" NOTE: Be sure to install the piston rings so that the manufacturer marks or ...

Removing the generator
1. Remove: Generator rotor nut "1" Washer NOTE: While holding the generator rotor "2" with the sheave holder "3", loosen the generator rotor nut. Do not allow the sheave holder to t ...

Other materials:

Checking the spark plug
1. Remove: Right side cover Refer to "GENERAL CHASSIS" on page 4-1. 2. Disconnect: Spark plug cap 3. Remove: Spark plug CAUTION:Before removing the spark plug, blow away any dirt accumulated in the spark plug well with compressed air to prevent it from falling ...

Catalytic converters
This vehicle is equipped with catalytic converters in the exhaust system. WARNING The exhaust system is hot after operation. To prevent a fire hazard or burns: Do not park the vehicle near possible fire hazards such as grass or other materials that easily burn. Park the vehic ...

Checking the cooling system
1. Remove: Side covers Upper side cowlings Refer to "GENERAL CHASSIS" on page 4-1. 2. Check: Radiator "1" Radiator inlet hose "2" Radiator outlet hose "3" Coolant reservoir hose "4" Water pump breather hose "5" Cracks/damage → Replace. Refer to "RADIATOR" on page 6-1 ...

2024 Copyright www.yam-r125.net |