Yamaha YZF-R125 Service Manual: Fuel injection system
- Circuit diagram
- Ecu self-diagnostic function
- Self-diagnostic function table
- Troubleshooting method
- Diagnostic mode
- Troubleshooting details
Troubleshooting
NOTE:
Before troubleshooting, remove the following part(s):
1. Rider seat
2. Fuel tank
3. Right upper side cowling
4. Passenger seat
...
Circuit diagram
2. Crankshaft position sensor
4. Main fuse
5. Main switch
6. Radiator fan motor fuse
8. Sidestand switch
9. Battery
17.Engine stop switch
19.Intake air pressure sensor
20.Intake air temper ...
Other materials:
Removing the handlebars
1. Stand the vehicle on a level surface.
WARNINGSecurely support the vehicle so that there
is
no danger of it falling over.
2. Remove:
Handlebar grip "1"
NOTE:
Blow compressed air between the handlebar
and the handlebar grip, and gradually push the
grip off the handleb ...
Self-diagnostic function table
If the ECU detects an abnormal signal from a sensor while the vehicle is
being driven, the ECU illuminates
the engine trouble warning light and provides the engine with alternate
operating instructions that
are appropriate for the type of malfunction.
When an abnormal signal is received fro ...
Adjusting the rear disc brake
1. Check:
Brake pedal position
(distance "a" from the center of the rider footrest
to the center of the brake pedal)
Out of specification Adjust.
2. Adjust:
Brake pedal position
a. Loosen the locknut "1".
b. Remove the cotter pin "2", washer "3", and
pin "4".
c. Turn t ...