Yamaha YZF-R125 Service Manual: Engine tightening torques

General tightening torque specifications

This chart specifies tightening torques for standard fasteners with a standard ISO thread pitch. Tightening torque specifications for special components or assemblies are provided for each chapt ...

Chassis tightening torques

NOTE: First, tighten the lower ring nut to approximately 48 Nm (4.8 m.kg, 35 ft.lb) with a torque wrench, then loosen the lower ring nut completely. Retighten the lower ring nut to ...

Other materials:

Chain drive
Removing the drive chain 1. Stand the vehicle on a level surface. WARNINGSecurely support the vehicle so that there is no danger of it falling over. NOTE: Place the vehicle on a suitable stand so that the rear wheel is elevated. ...

Self-diagnostic function table
If the ECU detects an abnormal signal from a sensor while the vehicle is being driven, the ECU illuminates the engine trouble warning light and provides the engine with alternate operating instructions that are appropriate for the type of malfunction. When an abnormal signal is received fro ...

Unstable handling
Handlebars - Bent or improperly installed right handlebar - Bent or improperly installed left handlebar 1. Steering head components - Improperly installed upper bracket - Improperly installed lower bracket (improperly tightened ring nut) - Bent steering stem - Damaged ball bearing or bearing ...