Yamaha YZF-R125 Service Manual: Engine
- Adjusting the valve clearance
- Adjusting the exhaust gas volume
- Adjusting the engine idling speed
- Adjusting the throttle cable free play
- Checking the spark plug
- Checking the ignition timing
- Measuring the compression pressure
- Checking the engine oil level
- Changing the engine oil
- Adjusting the clutch cable free play
- Cleaning the air filter element
- Checking the throttle body joint and air filter case joint
- Checking the fuel line
- Checking the cylinder head breather hose
- Checking the exhaust system
- Checking the coolant level
- Checking the cooling system
- Changing the coolant
Periodic maintenance and lubrication chart
NOTE:
The annual checks must be performed every year, except if a
kilometer-based maintenance,
or for the UK, a mileage-based maintenance, is performed instead.
From 30000 km (17500 mi), re ...
Adjusting the valve clearance
The following procedure applies to all of the
valves.
NOTE:
Valve clearance adjustment should be made
on a cold engine, at room temperature.
When the valve clearance is to be measured or
a ...
Other materials:
Checking the front brake hose
1. Check:
Brake hose "1"
Cracks/damage/wear
Replace.
2. Check:
Brake hose holder "2"
Loose connection Tighten the
holder bolt.
3. Hold the vehicle upright and apply the front
brake several times.
4. Check:
Brake hose
Brake fluid leakage Replace the
da ...
Main switch/steering lock
Main switch/steering lock
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
ON
All electrical circuits are supplied with
power, the meter lighting, taillight, license
plate light and ...
Bearings and oil seals
Install bearings "1" and oil seals "2" so that the
manufacturer's marks or numbers are visible.
When installing oil seals "1", lubricate the oil seal
lips with a light coat of lithium-soap-based
grease. Oil bearings liberally when installing, if
appropriate.
CAUTION:Do not spin th ...