Yamaha YZF-R125 Service Manual: Electrical components

Electrical components


1. Main switch

2. Clutch switch

3. Front brake light switch

4. Ignition coil

5. Throttle body sensor assembly (intake air pressure sensor, intake air temperature sensor, throttle position sensor)

6. FID (fast idle solenoid)

7. Rectifier/regulator

8. Lean angle sensor

9. Starting circuit cut-off relay

10.Turn signal relay

11.Radiator fan motor relay

12.Headlight relay

13.ECU (engine control unit)

14.Fuse box

15.Starter relay

16.Battery

17.Rear brake light switch

18.Sidestand switch

19.Neutral switch

20.Crankshaft position sensor

21.Coolant temperature sensor

22.Speed sensor

23.Radiator fan

24.Horn

Troubleshooting
If the fuel pump fails to operate. NOTE: Before troubleshooting, remove the following part(s): 1. Rider seat 2. Fuel tank ...

Checking the switches
1. Clutch switch 2. Main switch 3. Front brake light switch 4. Sidestand switch 5. Rear brake light switch 6. Neutral switch 7. Turn signal switch 8. Horn switch 9. Dimmer switch 10.Pass ...

Other materials:

Troubleshooting
Any of the following fail to light: headlight, high beam indicator light, taillight, license plate light, auxiliary light or meter light. NOTE: Before troubleshooting, remove the following part(s): 1. Seats 2. Fuel tank ...

Fuel tank cap
Fuel tank cap Fuel tank cap lock cover Unlock. To remove the fuel tank cap Open the fuel tank cap lock cover. Insert the key into the lock and turn it 1/4 turn counterclockwise. The lock will be released and the fuel tank cap can be removed. To install the fuel tank ca ...

Bearings and oil seals
Install bearings "1" and oil seals "2" so that the manufacturer's marks or numbers are visible. When installing oil seals "1", lubricate the oil seal lips with a light coat of lithium-soap-based grease. Oil bearings liberally when installing, if appropriate. CAUTION:Do not spin th ...

2024 Copyright www.yam-r125.net |