Yamaha YZF-R125 Service Manual: Disassembling the water pump
1. Remove:
- Water pump seal "1"
NOTE:
Remove the water pump seal from the inside of the water pump housing "2".
2. Remove:
- Bearing "1"
NOTE:
Remove the bearing from the outside of the water pump housing "2".
Water pump
...
Checking the water pump
1. Check:
Water pump housing cover
Water pump housing
Cracks/damage Replace.
Impeller shaft
Cracks/damage/wear Replace.
Bearing
Rough movement Replace.
Radiator outlet hose
Crac ...
Other materials:
Checking the front brake caliper
1. Check:
Brake caliper pistons "1"
Rust/scratches/wear Replace the
brake
caliper assembly.
Brake caliper body "2"
Cracks/damage Replace the brake
caliper
assembly.
Brake fluid delivery passages
(brake caliper body)
Obstruction Blow out with
compressed air.
...
Assembling the oil pump
1. Lubricate:
Oil pump inner rotor
Oil pump outer rotor
Oil pump driven gear
(with the recommended lubricant)
2. Install:
Oil pump outer rotor
Oil pump inner rotor "1"
Oil pump driven gear
Pin "2"
NOTE:
When installing the inner rotor, align the pin "2"
in the oil pump sh ...
Checking the steering
Worn or loose steering bearings may
cause danger. Therefore, the operation
of the steering must be checked as follows
at the intervals specified in the periodic
maintenance and lubrication
chart.
Place a stand under the engine to
raise the front wheel off the
ground. WARNING! To ...