Yamaha YZF-R125 Service Manual: Cooling system diagrams

Cooling system diagrams


  1. Radiator inlet hose
  2. Coolant reservoir hose
  3. Radiator cap
  4. Radiator
  5. Coolant reservoir breather hose
  6. Coolant reservoir
  7. Water pump breather hose
  8. Water pump
  9. Radiator outlet hose
    Lubrication diagrams
    Clutch push lever Main axle Drive axle Crankshaft Oil filter Oil pump assembly Oil strainer To cylinder head Camshaft Crankshaft Main axle Drive axle ...

    Cable routing
    Front brake light switch lead Right handlebar switch lead Throttle cable Main switch Clutch cable Clutch switch lead Left handlebar switch lead Sub-wire harness Horn Speed sen ...

    Other materials:

    Disassembling the rear brake caliper
    1. Remove: Brake caliper piston "1" Brake caliper piston dust seal "2" Brake caliper piston seal "3" a. Blow compressed air into the brake hose joint opening "a" to force out the piston from the brake caliper. WARNING Cover the brake caliper piston with a rag. Be careful no ...

    Disassembling the front wheel
    1. Remove: Oil seal Wheel bearings a. Clean the surface of the front wheel hub. b. Remove the oil seal "1" with a flat-head screwdriver. NOTE: To prevent damaging the wheel, place a rag "2" between the screwdriver and the wheel surface. c. Remove the wheel bearings "3" with a ge ...

    Checking the camshaft sprocket and timing chain guide
    1. Check: Camshaft sprocket More than 1/4 tooth wear "a" Replace the camshaft sprocket, timing chain and crankshaft as a set. a. 1/4 tooth b. Correct 1. Timing chain roller 2. Camshaft sprocket 2. Check: Timing chain guide (exhaust side) Damage/wear Replace. ...

    2024 Copyright www.yam-r125.net |