1. AC magneto
3. Rectifier/regulator
4. Main fuse
9. Battery
Bleeding the hydraulic brake system
WARNINGBleed the hydraulic brake system whenever:
the system is disassembled.
a brake hose is loosened, disconnected or
replaced.
the brake fluid level is very low.
brake operation is faulty.
NOTE:
Be careful not to spill any brake fluid or allow
th ...
Checking the front wheel
1. Check:
Front wheel axle
Roll the wheel axle on a flat surface.
Bends → Replace.
WARNINGDo not attempt to straighten a bent wheel
axle.
2. Check:
Tire
Front wheel
Damage/wear → Replace.
Refer to "CHECKING THE TIRES" on page
3-23 and "CHECKING TH ...
Checking and lubricating the cables
The following procedure applies to all of the inner
and outer cables.
WARNINGDamaged outer cable may cause the cable to
corrode and interfere with its movement. Replace
damaged outer cable and inner cables
as soon as possible.
1. Check:
Outer cable
Damage Replace.
2 ...