Yamaha YZF-R125 Service Manual: Checking the valve springs

The following procedure applies to all of the valve springs.

1. Measure:

  • Valve spring free length "a" Out of specification Replace the valve spring.

Checking the valve springs


2. Measure:

  • Compressed valve spring force "a" Out of specification Replace the valve spring.

Checking the valve springs


b. Installed length

3. Measure:

  • Valve spring tilt "a" Out of specification Replace the
    valve spring.

Checking the valve springs


    Checking the valve seats
    The following procedure applies to all of the valves and valve seats. 1. Eliminate: Carbon deposits (from the valve face and valve seat) 2. Check: Valve seat Pitting/wear Replace the ...

    Installing the valves
    The following procedure applies to all of the valves and related components. 1. Deburr: Valve stem end (with an oil stone) 2. Lubricate: Valve stem "1" Valve stem seal "2" (with ...

    Other materials:

    Ecu self-diagnostic function
    The ECU is equipped with a self-diagnostic function in order to ensure that the fuel injection system is operating normally. If this function detects a malfunction in the system, it immediately operates the engine under substitute characteristics and illuminates the engine trouble warning li ...

    Removing the front wheel (disc)
    1. Stand the vehicle on a level surface. WARNINGSecurely support the vehicle so that there is no danger of it falling over. 2. Elevate: Front wheel NOTE: Place the vehicle on a suitable stand so that the front wheel is elevated. 3. Remove: Front brake caliper NO ...

    Faulty lighting or signaling system
    Headlight does not come on - Wrong headlight bulb - Too many electrical accessories - Hard charging - Incorrect connection - Improperly grounded circuit - Poor contacts (main or light switch) - Burnt-out headlight bulb Headlight bulb burnt out - Wrong headlight bulb - Faulty battery - Fau ...

    2024 Copyright www.yam-r125.net |