1. Check:
2. Check:
Timing chain guide (intake side) Damage/wear Replace.
Checking the oil strainer
1. Check:
Oil strainer Damage Replace.
Contaminants Clean with solvent.
Measuring the compression pressure
NOTE:
Insufficient compression pressure will result in a
loss of performance.
1. Measure:
Valve clearance
Out of specification →Adjust.
Refer to "ADJUSTING THE VALVE CLEARANCE"
on page 3-3.
2. Start the engine, warm it up for several minutes,
and then turn it off.
3. Remove:
...
Checking the decompression system
1. Check:
Decompression system
a. Check the decompression system with the
camshaft sprocket and the decompression
cam installed to the camshaft.
b. Check that the decompression lever "1"
moves smoothly.
c. Without operating the decompression lever,
check that the decompression cam " ...
Storage
Short-term
Always store your motorcycle in a cool,
dry place and, if necessary, protect it
against dust with a porous cover.
NOTICE
Storing the motorcycle in a
poorly ventilated room or covering
it with a tarp, while it is still
wet, will allow water and humidity
to seep in and ...