Yamaha YZF-R125 Service Manual: Checking the throttle body
1. Check:
- Throttle body
Cracks/damage
Replace the
throttle body.
2. Check:
- Fuel passages
Obstruction Clean.
a. Wash the throttle body in a petroleum-based solvent.
Do not use any caustic carburetor cleaning solution.
b. Blow out all of the passages with compressed air.
Removing the throttle body
1. Extract the fuel in the fuel tank through the
fuel tank filler hole with a pump.
2. Disconnect:
Fuel hose
WARNINGCover the fuel hose connections with a
cloth
when disconnecti ...
Installing the throttle body
1. Install:
Throttle body joint clamps
NOTE:
Align the projections "a" on the throttle body joint
with the slot "b" in each throttle body joint clamp.
2. Install:
Throttle body joint ...
Other materials:
Checking the drive chain
1. Measure:
15-link section "a" of the drive chain
Out of specification Replace the drive
chain.
a. Measure the length "a" between the inner
sides of the pins and the length "b" between
the outer sides of the pins on a 15-link section
of the drive chain as shown in the illustration.
...
Care
While the open design of a motorcycle
reveals the attractiveness of the technology,
it also makes it more vulnerable.
Rust and corrosion can develop
even if high-quality components are
used. A rusty exhaust pipe may go unnoticed
on a car, however, it detracts
from the overall appearanc ...
Checking the valves and valve guides
The following procedure applies to all of the
valves and valve guides.
1. Measure:
Valve-stem-to-valve-guide clearance
Out of specification Replace the
valve
guide.
Valve-stem-to-valve-guide clearance =
Valve guide inside diameter "a" -
Valve stem diameter "b"
2. Replace:
...