1. Check:
Spark plug cap resistance Out of specification Replace.
a. Remove the spark plug cap from the spark plug lead.
b. Connect the pocket tester ( × 1k)
to the
spark plug cap as shown.
c. Measure the spark plug cap resistance.
Identification
Vehicle identification number
The vehicle identification number "1" is stamped
into the right side of the steering head pipe.
Model label
The model label "1" is affixed to the frame. This
information will be needed to order spare parts.
...
Coolant
The coolant level should be checked
before each ride. In addition, the coolant
must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
To check the coolant level
Place the vehicle on a level surface
and hold it in an upright position.
TIP
...
Checking the fuses
The following procedure applies to all of the fuses.
CAUTION:To avoid a short circuit, always turn the
main
switch to "OFF" when checking or replacing
a fuse.
1. Remove:
Rider seat
Refer to "GENERAL CHASSIS" on page 4-1.
2. Check:
Fuse
a. Connect the pocket te ...