1. Check:
Checking the stopper lever
1. Check:
Roller turns roughly Replace
the stopper
lever.
Multi-function display
1. Multi-function display
2. "RESET/SELECT" button
The multi-function display is equipped with the
following:
a speedometer (which shows the riding speed)
an odometer (which shows the total distance
traveled)
two tripmeters (which show the distance traveled
since they were last ...
Checking the ignition timing
NOTE:
Prior to checking the ignition timing, check the
wiring connections of the entire ignition system.
Make sure all connections are tight and free of
corrosion.
1. Remove:
Rider seat
Left lower side cowling
Refer to "GENERAL CHASSIS" on page 4-1.
2. Remove:
Timing mark acces ...
Assembling the crankcase
1. Thoroughly clean all the gasket mating surfaces
and crankcase mating surfaces.
2. Apply:
Sealant
(onto the crankcase mating surfaces)
NOTE:
Do not allow any sealant to come into contact
with the oil gallery.
3. Install:
Right crankcase
NOTE:
Turn the shift drum segment ...