The following procedure applies to all of the shift forks.
1. Check:
2. Check:
Bends Replace.
WARNING Do not attempt to straighten a bent shift fork guide bar. |
3. Check:
Shift fork movement
(along the shift fork guide bar)
Rough movement Replace the shift
forks
and shift fork guide bar as a set.
Checking the decompression system
1. Check:
Decompression system
a. Check the decompression system with the
camshaft sprocket and the decompression
cam installed to the camshaft.
b. Check that the decompression lever "1"
moves smoothly.
c. Without operating the decompression lever,
check that the decompression cam " ...
Disassembling the front fork legs
The following procedure applies to both of the
front fork legs.
1. Remove:
Rubber cap
Clip "1"
Front fork cap "2"
(with O-ring)
Fork spring
NOTE:
Push the front fork cap in the direction of the arrow
shown in the illustration to remove the clip.
2. Drain:
Fork oil
NOTE ...
Checking the radiator
1. Check:
Radiator fins
obstruction clean.
Apply compressed air to the rear of the radiator.
Damage repair or replace.
NOTE:
Straighten any flattened fins with a thin, flat-head
screwdriver.
2. Check:
Radiator hoses
Cracks/damage Replace.
3. Measure:
Radiator cap ...