Yamaha YZF-R125 Service Manual: Checking the rear shock absorber assembly

Yamaha YZF-R125 Service Manual / Chassis / Rear shock absorber assembly / Checking the rear shock absorber assembly

1. Check:

  • Rear shock absorber rod Bends/damage Replace the rear
    shock absorber assembly.
  • Rear shock absorber Oil leaks Replace the rear
    shock absorber assembly.
  • Spring Damage/wear   Replace the
    rear shock absorber assembly.
  • Bushing Damage/wear Replace the rear
    shock absorber assembly.
  • Bolts Bends/damage/wear  
    Replace.
    Removing the rear shock absorber assembly
    1. Stand the vehicle on a level surface. WARNINGSecurely support the vehicle so that there is no danger of it falling over. NOTE: Place the vehicle on a suitable stand so that th ...

    Checking the connecting arms and relay arm
    1. Check: Connecting arms Relay arm Damage/wear Replace. 2. Check: Bearings Oil seals Damage/pitting Replace. 3. Check: Spacers Damage/scratches Replace. ...

    Other materials:

    Assembling the front fork legs
    The following procedure applies to both of the front fork legs. WARNING Make sure the oil levels in both front fork legs are equal. Uneven oil levels can result in poor handling and a loss of stability. NOTE: When assembling the front fork leg, be sure to rep ...

    Checking the water pump
    1. Check: Water pump housing cover Water pump housing Cracks/damage Replace. Impeller shaft Cracks/damage/wear Replace. Bearing Rough movement Replace. Radiator outlet hose Cracks/damage Replace. ...

    Checking the drive chain
    1. Measure: 15-link section "a" of the drive chain Out of specification Replace the drive chain. a. Measure the length "a" between the inner sides of the pins and the length "b" between the outer sides of the pins on a 15-link section of the drive chain as shown in the illustration. ...

    2024 Copyright www.yam-r125.net |