1. Remove:
2. Check:
Excessive noise during operation
Replace
the primary drive gear and clutch housing as
a set
3. Install:
Checking the cylinder head
1. Eliminate:
Combustion chamber carbon deposits
(with a rounded scraper)
NOTE:
Do not use a sharp instrument to avoid damaging
or scratching:
Spark plug bore threads
Valve seats
2. Check:
Cylinder head
Damage/scratches Replace.
Cylinder head water jacket
Min ...
Troubleshooting charts
Starting problems or poor engine performance
Starting problems or poor engine performance
Engine overheating
WARNING
Do not remove the radiator cap when the engine and radiator are hot.
Scalding hot fluid and steam may be
blown out under pressure, which could cause serious injury. Be ...
Checking the decompression system
1. Check:
Decompression system
a. Check the decompression system with the
camshaft sprocket and the decompression
cam installed to the camshaft.
b. Check that the decompression lever "1"
moves smoothly.
c. Without operating the decompression lever,
check that the decompression cam " ...