1. Check:
Horn resistance Out of specification Replace.
a. Disconnect the horn connectors from the horn terminals.
b. Connect the pocket tester ( × 1) to the horn terminals.
c. Measure the horn resistance.
2. Check:
Horn sound Faulty sound Adjust or replace.
a. Connect a battery (12 V) to the horn.
b. Turn the adjusting screw in direction "a" or "b" until the specified horn sound is obtained.
Checking the drive chain
1. Measure:
15-link section "a" of the drive chain
Out of specification Replace the drive
chain.
a. Measure the length "a" between the inner
sides of the pins and the length "b" between
the outer sides of the pins on a 15-link section
of the drive chain as shown in the illustration.
...
Checking the shift drum assembly
1. Check:
Shift drum groove
Damage/scratches/wear Replace
the shift
drum assembly.
Shift drum segment "1"
Damage/wear Replace the
shift drum assembly.
Shift drum bearing "2"
Damage/pitting Replace the
shift drum assembly.
...
For your safety - pre-operation checks
Inspect your vehicle each time you use it to make sure the vehicle is in safe
operating condition. Always follow the inspection
and maintenance procedures and schedules described in the Owner's Manual.
WARNING
Failure to inspect or maintain the vehicle properly increases the possibility of
...