1. Stand the vehicle on a level surface.
WARNING Securely support the vehicle so that there is no danger of it falling over. |
2. Check:
3. Hold the vehicle upright and apply the front brake.
4. Check:
Front fork operation Push down hard on the handlebar several times and check if the front fork rebounds smoothly.
Rough movement Repair.
Refer to "FRONT FORK" on page 4-44.
Removing the cylinder head
1. Align:
"I" mark "a" on the generator rotor
(with the stationary pointer "b" on the generator
cover)
a. Turn the crankshaft counterclockwise.
b. When the piston is at TDC on the compression
stroke, align the "I" mark "c" on the camshaft
sprocket with the mark "d" on the
cylinder h ...
Assembling the front fork legs
The following procedure applies to both of the
front fork legs.
WARNING
Make sure the oil levels in both front fork
legs are equal.
Uneven oil levels can result in poor handling
and a loss of stability.
NOTE:
When assembling the front fork leg, be sure to
rep ...
Replacing the air filter element and cleaning the check hose
The air filter element should be replaced
at the intervals specified in the
periodic maintenance and lubrication
chart. Have a Yamaha dealer replace
the air filter element more frequently if
you are riding in unusually wet or dusty
areas. In addition, the air filter check
hose must be ...