1. Check:
2. Check:
3. Check:
Assembling the front brake master cylinder
WARNING
|
Installing the rear wheel (disc)
1. Install:
Rear brake disc
NOTE:
Tighten the brake disc bolts in stages and in a
crisscross pattern.
2. Check:
Rear brake disc
Refer to "CHECKING THE REAR BRAKE
DISC" on page 4-33.
3. Lubricate:
Rear wheel axle
Contact surface of rear wheel hub and rear
wheel
Whee ...
Installing the piston and cylinder
1. Install:
Top ring "1"
2nd ring "2"
Oil ring expander "3"
Lower oil ring rail "4"
Upper oil ring rail "5"
NOTE:
Be sure to install the piston rings so that the
manufacturer marks or numbers face up.
2. Install:
Piston "1"
Piston pin "2"
Piston pin clips "3"
NOTE:
...
Adjusting the engine idling speed
The engine idling speed must be
checked and, if necessary, adjusted as
follows at the intervals specified in the
periodic maintenance and lubrication
chart.
The engine should be warm before
making this adjustment.
Remove panel A.
Check the engine idling speed
and, if necessary, ...