Yamaha YZF-R125 Service Manual: Checking the front brake caliper
1. Check:
- Brake caliper pistons "1"
Rust/scratches/wear
Replace the
brake caliper assembly. - Brake caliper body "2"
Cracks/damage
Replace the brake
caliper assembly. - Brake fluid delivery passages
(brake caliper body)
Obstruction
Blow out with
compressed air.
| WARNING Whenever a brake caliper is disassembled, replace the brake caliper piston dust seals and piston seals. |
2. Check:
- Brake caliper bracket
Cracks/damage
Replace.
Removing the front brake caliper
NOTE:
Before disassembling the brake caliper, drain
the brake fluid from the entire brake system.
1. Remove:
Brake hose union bolt "1"
Copper washers "2"
Brake hose "3"
NOTE:
Put the en ...
Assembling the front brake caliper
WARNING
Before installation, all internal brake components
should be cleaned and lubricated
with clean or new brake fluid.
Never use solvents on internal brake components
as ...
Other materials:
Removing the crankshaft
1. Remove:
Crankshaft "1"
NOTE:
Remove the crankshaft with the crankcase
separating tool "2".
Make sure the crankcase separating tool is
centered over the crankshaft.
CAUTION:
To protect the end of the crankshaft, place
an appropriate sized socket between the
c ...
Replacing the rear brake pads
NOTE:
When replacing the brake pads, it is not necessary
to disconnect the brake hose or disassemble
the brake caliper.
1. Remove:
Brake pads
Brake pad spring
NOTE:
To remove the inner brake pad "1", push down
on the brake caliper bracket so that there is
space to remove the brake pa ...
Checking the front and rear brake pads
The front and rear brake pads must be
checked for wear at the intervals specified
in the periodic maintenance and
lubrication chart.
Front brake pads
Remove the front brake caliper by
removing the bolts.
Bolt
Brake caliper
Lining thickness
Check each front br ...