1. Check:
a. Check the decompression system with the camshaft sprocket and the decompression cam installed to the camshaft.
b. Check that the decompression lever "1" moves smoothly.
c. Without operating the decompression lever, check that the decompression cam "2" projects from the camshaft (exhaust cam) as shown in the illustration "A".
d. Move the decompression lever "1" in the direction of the arrow shown and check that the decompression cam does not project from the camshaft (exhaust cam) as shown in the illustration "B".
Removing the starter clutch
1. Remove:
Starter clutch bolts "1"
NOTE:
While holding the generator rotor "2" with the
sheave holder "3", remove the starter clutch
bolts.
Do not allow the sheave holder to touch the
projection on the generator rotor.
...
Checking the rear brake hose
1. Check:
Brake hoses "1"
Cracks/damage/wear
Replace.
2. Check:
Brake hose holder "2"
Loose connection Tighten the
holder bolt.
Loose or open holder Fasten
properly.
3. Hold the vehicle upright and apply the rear
brake several times.
4. Check:
Brake ho ...
Installing the camshaft and rocker arms
1. Lubricate:
Rocker arms
Rocker arm shafts
2. Lubricate:
Camshaft
3. Install:
Camshaft "1"
NOTE:
Make sure that the camshaft projections "a" and
hole "b" are positioned as shown in the illustration.
4. Install:
Rocker arms
Rocker arm shafts "1"
NOTE:
Make ...