1. Remove:
2. Check:
Loose connection → Connect properly.
CAUTION: Make sure the cylinder head breather hose is routed correctly. |
3. Install:
Indicator and warning lights
Indicator and warning lights
Neutral indicator light""
Turn signal indicator light""
High beam indicator light""
Engine trouble warning light""
Coolant temperature warning light""
Turn signal indicator light""
This indicator light flashes when the
turn signal switch is pushed t ...
Checking the cooling system
1. Remove:
Side covers
Upper side cowlings
Refer to "GENERAL CHASSIS" on page 4-1.
2. Check:
Radiator "1"
Radiator inlet hose "2"
Radiator outlet hose "3"
Coolant reservoir hose "4"
Water pump breather hose "5"
Cracks/damage → Replace.
Refer to "RADIATOR" on page 6-1 ...
Checking the tires
The following procedure applies to both of the
tires.
1. Check:
Tire pressure
Out of specification Regulate.
WARNING
The tire pressure should only be checked
and regulated when the tire temperature
equals the ambient air temperature.
The tire pressure must be adjuste ...