Yamaha YZF-R125 Service Manual: Checking the clutch plates
The following procedure applies to all of the clutch plates.
1. Check:
- Clutch plate
Damage
Replace the clutch
plates as a set.
2. Measure:
- Clutch plate warpage
(with a surface plate and thickness gauge "1")
Out of specification
Replace
the clutch plates as a set.
Checking the friction plates
The following procedure applies to all of the friction
plates.
1. Check:
Friction plate
Damage/wear Replace the
friction plates
as a set.
2. Measure:
Friction plate thickness
Ou ...
Checking the clutch springs
The following procedure applies to all of the
clutch springs.
1. Check:
Clutch spring
Damage Replace the clutch
springs as a
set.
2. Measure:
Clutch spring free length "a"
Out o ...
Other materials:
Cleaning and lubricating the drive chain
The drive chain must be cleaned and
lubricated at the intervals specified in
the periodic maintenance and lubrication
chart, otherwise it will quickly wear
out, especially when riding in dusty or
wet areas. Service the drive chain as
follows.
NOTICE
The drive chain must be lubricated
...
Installing the relay arm
1. Lubricate:
Spacers
Bearings
Oil seals
Bolts (unthreaded shaft portion only)
2. Install:
Bearing "1"
(to the relay arm)
Oil seal "2"
(to the relay arm)
3. Rear shock absorber assembly
4. Relay arm
5. Connecting arm
A. Left side
B. Right side ...
Shifting
Shifting
Shift pedal
Neutral position
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the illustration.
TIP
To shift the transmission into the neutral
position, press the ...