Yamaha YZF-R125 Owners Manual: Checking and lubricating the brake and shift pedals

Yamaha YZF-R125 Owners Manual / Periodic maintenance and adjustment / Checking and lubricating the brake and shift pedals

Brake pedal


Brake pedal

Shift pedal


Shift pedal

The operation of the brake and shift pedals should be checked before each ride, and the pedal pivots should be lubricated if necessary.

Recommended lubricant:

Lithium-soap-based grease

    Checking and lubricating the throttle grip and cable
    The operation of the throttle grip should be checked before each ride. In addition, the cable should be lubricated by a Yamaha dealer at the intervals specified in the periodic maintenance cha ...

    Checking and lubricating the brake and clutch levers
    Brake lever Brake lever Clutch lever Clutch lever The operation of the brake and clutch levers should be checked before each ride, and the lever pivots should be lubricated if necess ...

    Other materials:

    Care
    While the open design of a motorcycle reveals the attractiveness of the technology, it also makes it more vulnerable. Rust and corrosion can develop even if high-quality components are used. A rusty exhaust pipe may go unnoticed on a car, however, it detracts from the overall appearanc ...

    Coolant
    The coolant level should be checked before each ride. In addition, the coolant must be changed at the intervals specified in the periodic maintenance and lubrication chart. To check the coolant level Place the vehicle on a level surface and hold it in an upright position. TIP ...

    Checking the clutch plates
    The following procedure applies to all of the clutch plates. 1. Check: Clutch plate Damage Replace the clutch plates as a set. 2. Measure: Clutch plate warpage (with a surface plate and thickness gauge "1") Out of specification Replace the clutch plates as a set. ...

    2024 Copyright www.yam-r125.net |