Replacing the front brake pads
NOTE:
When replacing the brake pads, it is not necessary
to disconnect the brake hose or disassemble
the brake caliper.
1. Measure:
Brake pad wear limit "a"
Out of specification Replace
the brake
pads as a set.
2. Install:
Brake pad support
Brake pad spring
Brake pads ...
Checking the drive chain
1. Measure:
15-link section "a" of the drive chain
Out of specification Replace the drive
chain.
a. Measure the length "a" between the inner
sides of the pins and the length "b" between
the outer sides of the pins on a 15-link section
of the drive chain as shown in the illustration.
...
Installing the cylinder head
1. Install:
Cylinder head
NOTE:
Pass the timing chain through the timing chain
cavity.
2. Tighten:
Cylinder head bolts "1"
Cylinder head bolts "2"
NOTE:
Lubricate the cylinder head bolts and washers
with engine oil.
Tighten the cylinder head bolts in the proper
tighten ...