Yamaha YZF-R125 Service Manual: Adjusting the rear wheel static balance

Yamaha YZF-R125 Service Manual / Chassis / Rear wheel / Adjusting the rear wheel static balance

NOTE:

  • After replacing the tire, wheel or both, the rear wheel static balance should be adjusted.
  • Adjust the rear wheel static balance with the brake disc and rear wheel drive hub installed.

1. Adjust:

  • Rear wheel static balance Refer to "ADJUSTING THE FRONT WHEEL STATIC BALANCE" on page 4-9.
    Checking and replacing the rear wheel sprocket
    1. Check: Rear wheel sprocket More than 1/4 tooth "a" wear Replace the rear wheel sprocket. Bent teeth Replace the rear wheel sprocket. b. Correct 1. Drive chain roller 2. ...

    Installing the rear wheel (disc)
    1. Install: Rear brake disc NOTE: Tighten the brake disc bolts in stages and in a crisscross pattern. 2. Check: Rear brake disc Refer to "CHECKING THE REAR BRAKE DISC" on page 4- ...

    Other materials:

    Checking the timing chain and timing chain guide
    1. Check: Timing chain Damage/stiffness Replace the timing chain and camshaft sprocket as a set. 2. Check: Timing chain guide (intake side) Damage/wear Replace. Checking the oil strainer 1. Check: Oil strainer Damage   Replace. Contaminants Clean with solvent. ...

    Checking the camshaft sprocket and timing chain guide
    1. Check: Camshaft sprocket More than 1/4 tooth wear "a" Replace the camshaft sprocket, timing chain and crankshaft as a set. a. 1/4 tooth b. Correct 1. Timing chain roller 2. Camshaft sprocket 2. Check: Timing chain guide (exhaust side) Damage/wear Replace. ...

    Adjusting the engine idling speed
    NOTE: Prior to adjusting the engine idling speed, the air filter element should be clean, and the engine should have adequate compression. 1. Start the engine and let it warm up for several minutes. 2. Remove: Rider seat Refer to "GENERAL CHASSIS" on page 4-1. 3. Lift the fuel tank. ...

    2024 Copyright www.yam-r125.net |