Yamaha YZF-R125 Owners Manual: Genuine Yamaha Accessories

Yamaha YZF-R125 Owners Manual / Safety information / Genuine Yamaha Accessories

Choosing accessories for your vehicle is an important decision. Genuine Yamaha accessories, which are available only from a Yamaha dealer, have been designed, tested, and approved by Yamaha for use on your vehicle.

Many companies with no connection to Yamaha manufacture parts and accessories or offer other modifications for Yamaha vehicles. Yamaha is not in a position to test the products that these aftermarket companies produce.

Therefore, Yamaha can neither endorse nor recommend the use of accessories not sold by Yamaha or modifications not specifically recommended by Yamaha, even if sold and installed by a Yamaha dealer.

    Loading
    Adding accessories or cargo to your motorcycle can adversely affect stability and handling if the weight distribution of the motorcycle is changed. To avoid the possibility of an accident, use ...

    Aftermarket Parts, Accessories, and Modifications
    While you may find aftermarket products similar in design and quality to genuine Yamaha accessories, recognize that some aftermarket accessories or modifications are not suitable because of ...

    Other materials:

    Installing the drive chain
    1. Lubricate: Drive chain Master link 2. Install: Drive sprocket Drive sprocket retainer bolts 3. Install: Master link O-rings Master link plate Master link clip "1" CAUTION: The closed end of the master link clip must face in the direction of drive ch ...

    Assembling the rear brake caliper
    WARNING Before installation, all internal brake components should be cleaned and lubricated with clean or new brake fluid. Never use solvents on internal brake components as they will cause the brake caliper piston dust seal and piston seal to swell and distort. ...

    Checking the crankshaft position sensor
    1. Disconnect: Crankshaft position sensor coupler (from the wire harness) 2. Check: Crankshaft position sensor resistance Out of specification  Replace the crankshaft position sensor/stator assembly. a. Connect the pocket tester ( × 100) to the crankshaft position sensor c ...

    2025 Copyright www.yam-r125.net |